fbpx

CUSTOMER SUPPORT

HOW TO MEASURE WINDOW BLINDS 

OUTSIDE MOUNT

 FOR WIDTH

 1) Measure the window opening width from the bottom edge on the middle and the window’s top edge using cm as the unit of measurement. Then get the largest value and add 15.24cm for the allowance.

FOR HEIGHT

 2) Measure the window opening height on the left, middle, and right sides using cm as the unit of measurement. Then get the largest value and add 10.16cm for the allowance.

PRICE ESTIMATE

The price of window blinds varies from brand, design, and area of the window.

Here is a sample computation on how to compute the price of window blinds.

Window Dimension

Width=150cm

Height=120cm

Window blinds design=Basic

Price per sq.ft= Php 190/sq.ft

Price=150cm * 120cm * 0.001076 * 190 = Php 3,680

Please note that this is just a sample computation. The actual price will vary based on promo or sale currently available.

WINDOW BLINDS INSTALLATION

Window blinds are a modern window cover; they allow you to control the sunlight coming in, provide maximum privacy, operate easily, and are aesthetically attractive. In this procedure, I will show you how to install window blinds in less than 10 minutes. You can also watch the full video below.

What tools are needed?

  • Hammer drill (with 3/16 Drill bit)
  • Measuring tape
  • Pencil
  • Screwdriver
  • Cutter
  • Extension cord(If necessary)

What are the blinds accessories?

  • L-bracket
  • Clip
  • Tox and screw 

Procedure:

Step 1 Mark the wall where you are going to drill

  • Measure 3in from the top edge of the window
  • Mark the wall where you are going to drill
  • Do it on the other side

Step 2 Drill the marked location with a hammer drill

Step 3 Unbox the blinds using a cutter 

  • Be careful not to hit the fabric

Step 4 Install the L-bracket and Clip

  • Put the tox
  • Put the L-bracket in place
  • Fasten the screw with a screwdriver
  • Attach the clip on the L-bracket hook
  • Do it on the other side

Step 5 Clamp the headrail with the clip

  • Remove the rubber band on the cord
  • Pull down the cord for about 2 inches to pull off the lower rail from the headrail
  • Using the left thumb, push the clip upward; with the right thumb on the lower front casing of the headrail, push up the headrail

PRODUCT SHIPPING

Our products will be delivered within Metro Manila to your doorsteps in less than four days after placing an order. Once delivered, the installation date is usually scheduled for the next day.

Shopping Cart